Quantifying the electron-donating and -accepting capacities of wastewater for evaluating and optimizing biological wastewater treatment processes

Biological processes have been widely used for the treatment of both domestic and industrial wastewaters. In such biological processes, pollutants are converted into pollution-free substances by microorganisms through oxidation-reduction reactions. Thus, how to quantify the internal oxidation-reduction properties wastewaters and seek out targeted countermeasures is essential to understand, operate, and optimize biological wastewater treatment systems. So far, no such approach is available yet. In this work, a novel concept of electron neutralization-based evaluation is proposed to describe the internal oxidation-reduction properties of wastewater. Pollutants in wastewater are defined as electron donor substances (EDSs) or electron acceptor substances (EASs), which could give or accept electrons, respectively. With such an electron neutralization concept, several parameters, i.e., electron residual concentration (R), economy-related index (E and E_r), and economical evaluation index (Y and Y_r), are defined. Then, these parameters are used to evaluate the performance and economic aspects of currently applied wastewater treatment processes and even optimize systems. Three case studies demonstrate that the proposed concept could be effectively used to reduce wastewater treatment costs, assess energy recovery, and evaluate process performance. Therefore, a new, simple, and reliable methodology is established to describe the oxidation-reduction properties of wastewater and assess the biological wastewater treatment processes.     

电子束脱硫技术及其进展

介绍电子束脱硫原理以及在四川成都热电厂应用情况。由于采用干法工艺,流程简单、占地面积小,适用于厂区狭小的电厂安装脱硫装置。     

株洲市某交通干道夏季细颗粒物分布特征及相关因素

2014年夏季采用扫描电迁移率粒径谱仪,选取株洲市某交通干道附近,对其环境细颗粒物进行连续测量,并统计干道的车流量。实验结果表明:环境中的细颗粒物数浓度呈双峰分布,峰值一般出现在9.47~17.5、98.2~121.9 nm粒径段,晴天和雨天不同粒径段的细颗粒物数浓度的波动性不一致,降水过程对细颗粒有一定的去除作用。结合所观测的机动车流量和所排放的细颗粒物粒径谱,分析其与细颗粒物浓度之间的关系,可初步判断该环境中爱根核模态的细颗粒物来源于机动车排放。     

Determination of indicator polychlorinated biphenyls (PCBs) by gas chromatography–electron capture detector

An effective method for determination of indicator polychlorinated biphenyls (PCBs) has been validated using gas chromatography (GC) equipped with electron capture detector (ECD). The GC–ECD method was validated by determining the linear range (working range) for determination of the compounds, minimum detectable quantities (MDQ), the precision and accuracy of the method for the analysis of the compounds. MDQ obtained for the compounds ranges from 0.0005 to 0.002 ng. Indeed the method was found to be more sensitive as the number of chlorine atoms attached to the biphenyl increases. The precision and accuracy of the GC method validated ranges from 2.4% to 14.5% and −7.0% to 14.6% respectively. Coefficient of variation associated with the repeatability of the retention times and corresponding peak areas was found to be 0.0001–0.0007 for the retention times and 0.0014–0.059 for the peak areas. Percentage recoveries for the compounds were in the range of 95.7–101.0%. The validated method was then applied to determine levels of indicator PCBs in sediments sampled from eleven sampling points along the Lake Bosuntwi in Ghana and the highest PCB load of 19.17 ng g⁻¹ was recorded at Pipie No. 2. PCB 52 and PCB 101 were found to be the most ubiquitous indicator PCBs in the study area, both with 90.91% occurrence.     

Release of silver nanoparticles from outdoor facades

In this study we investigate the release of metallic silver nanoparticles (Ag-NP) from paints used for outdoor applications. A facade panel mounted on a model house was exposed to ambient weather conditions over a period of one year. The runoff volume of individual rain events was determined and the silver and titanium concentrations of 36 out of 65 runoff events were measured. Selected samples were prepared for electron microscopic analysis. A strong leaching of the Ag-NP was observed during the initial runoff events with a maximum concentration of 145 μ Ag/l. After a period of one year, more than 30% of the Ag-NP were released to the environment. Particles were mostly <15 nm and are released as composite colloids attached to the organic binders of the paint. Microscopic results indicate that the Ag-NP are likely transformed to considerably less toxic forms such as Ag₂S.     

New tabletop SEM-EDS-based approach for cost-efficient monitoring of airborne particulate matter

Recent developments in scanning electron microscopy (SEM) have produced tabletop instruments capable of reasonable imaging resolution at less cost compared to conventional equipment. Combining the SEM with energy dispersive spectroscopy (EDS) allows the possibility of elemental analysis through detection of X-rays emitted from interaction between individual particles and the SEM electron beam, revealing their atomic composition. It’s well known that exposure to inhalable particulate matter (PM) poses health risks and routine monitoring of the chemical content of these has been realized. Exposure information is of a general character but by combining the chemical build-up of monitored particles and knowledge of their inherent health effects will allow better risk assessment. An analysis technique using a tabletop SEM with EDS is demonstrated on particles collected onto nucleopore filters from urban, industrial and rural areas. Detailed characterization of the instruments analysis capabilities as applied to PM are described.     

Ambient monitoring of asbestos in selected Italian living areas

This paper presents the results of an intensive monitoring activity of the particulate, fall-out and soil of selected living areas in Italy with the aim to detect the asbestos concentration in air and subsequent risk of exposure for the population in ambient living environments, and to assess the nature of the other mineral phases composing the particulate matrix. Some areas were sorted out because of the presence of asbestos containing materials on site whereas others were used as blank spots in the attempt to detect the background environmental concentration of asbestos in air. Because the concentration of asbestos in ambient environments is presumably very low, and it is well known that conventional low–medium flow sampling systems with filters of small diameter (25 mm) may collect only a very small fraction of particulate over a short period, for the first time here, an intense monitoring activity was conducted with a high flow sampling system. The high flow system requires the use of large cellulose filters with the advantage that, increasing the amount of collected dust, the probability to collect asbestos fibers increases. Both the protocol of monitoring and analysis are novel and prompted by the need to increase the sensitivity towards the small number of expected fibers. With this goal, the collection of fall-out samples (the particulate falling into a collector filled with distilled water during the monitoring shift) and soil samples was also accomplished. The analytical protocol of the matrix particulate included preliminary X-ray powder diffraction (XRPD), optical microscopy and quantitative electron microscopy (SEM and TEM). Correlations with climatic trends and PM10 concentration data were also attempted.The surprising outcome of this work is that, despite the nature of the investigated site, the amount of dispersed asbestos fibers is very low and invariably lower than the theoretical method detection limits of the SEM and TEM techniques for identification and counting of asbestos fibers. The results are compared to the literature data worldwide and an updated model for asbestos fibers dispersion in ambient environments is proposed.     

Dye reduction-based electron-transfer activity monitoring assay for assessing microbial electron transfer activity of microbial fuel cell inocula

Microbial fuel cells (MFC) utilize microbes as catalysts to convert chemical energy to electricity. Inocula used for MFC operation must therefore contain active microbial population. The dye reduction-based electron-transfer activity monitoring (DREAM) assay was employed to evaluate different inocula used in MFCs for their microbial bioelectrical activity. The assay utilizes the redox property of Methylene Blue to undergo color change from blue to colorless state upon microbial reduction. The extent of Methylene Blue reduction was denoted as the DREAM assay coefficient. DREAM assay was initially performed on a microbial culture along with the growth curve and estimation of colony forming units (CFUs). DREAM coefficient correlated to the CFU/mL obtained over time as growth progressed. The assay was then extended to water samples (domestic sewage, lake and a man-made pond) serving as inocula in MFCs. Domestic wastewater gave the highest DREAM coefficient (0.300 ± 0.05), followed by pond (0.224 ± 0.07) and lake (0.157 ± 0.04) water samples. Power density obtained conformed to the DREAM coefficient values, with the three samples generating power densities of 46.45 ± 5.1, 36.12 ± 3.2 and 25.08 ± 4.3 mW/m² respectively. We have also studied the role of addition of various carbon sources and their concentrations towards improving the sensitivity of the assay. The DREAM assay is a rapid, easy-to-perform and cost-effective method to assess inocula for their suitability as anolytes in terms of electron transfer potential in MFCs.     

Distinct roles of pH and organic ligands in the dissolution of goethite by cysteine

Electron shuttles such cysteine play an important role in Fe cycle and its availability in soils,while the roles of pH and organic ligands in this process are poorly understood.Herein,the reductive dissolution process of goethite by cysteine were explored in the presence of organic ligands.Our results showed that cysteine exhibited a strong reactivity towards goethite-a typical iron minerals in paddy soils with a rate constant ranging from 0.01 to0.1 hr-1.However,a large portion of Fe(Ⅱ) appeare...